|
| | 401 General Specifications 
| These HI-REL connectors, rated at 40 KVDC, are shielded with spring grounding fingers on the plug. The connectors will operate at altitudes up to 70,000 ft. at the rated voltage. Operating temperature is -55°C to +125°C.
Applications
Series 401 connectors are used in both airborne and ground high voltage power supplies and components requiring high voltage interconnections.
Interface cleaning Interface cleaning
High voltage connectors must always be cleaned prior to mating. The proper cleaning method is to wipe or spray the interface area with isopropyl alcohol and immediately blow an inert gas such as dry nitrogen over the interface area until dry. No other cleaning method should be attempted. |  
| WARNING: These connectors should NEVER be handled, mated or unmated when voltage is applied. |
Download PDF for all 400 Series General Specifications |
401 Single pin, shielded connectors. Bayonet coupling 
Receptacles | | P/N 167-9833 Series 401 Sealed Rear Mount receptacle
Sealed Rear Mount Receptacle Receptacle Attributes
- Operating voltage: 40 KVDC up to 70,000 ft.
- Pressure: Sealed for 15 psi differential pressure. Maximum leakage: 1 X 10-6 cc/sec. He.
- Mounting: Rear mount. Requires 1.010" diameter hole or optional “D” hole (shown) | |
|
Cable Assemblies Series 401 Double-Ended Cable Assembly | |
| | P/N 167-8793 Series 401 Double Ended Cable Assembly (shown) uses shielded .150 Dia. FEP cable and Plug P/N 167-9831
P/N 167-8795 Series 401 Double Ended Cable Assembly Uses non-shielded .150 Dia. FEP wire and Plug P/N 167-8899
|  | Series 401 Single-Ended Cable Assembly | |
| | P/N 167-8794 Series 401 Double Ended Cable Assembly (shown) uses shielded .150 Dia. FEP cable and Plug P/N 167-9831
P/N 167-8796 Series 401 Single Ended Cable Assembly Uses non-shielded .150 Dia. FEP wire and Plug P/N 167-8899
|  | Series 401 Cable Assembly Attributes | |
| | - Operating voltage: 40 KVDC up to 70,000 ft.
- Mating connectors: Mates all series 401 receptacles
- Bulk cable |
Download this page as a PDF for best print quality.
C Series General Specifications
C Series Lead Assemblies and Receptacles | | In 1997, Reynolds Industries, Inc. acquired the RLA series and other connector product lines from Rowe Industries, Inc. The RLA series has been renamed C series
C series high voltage lead assemblies and receptacles are widely used in CRT displays, ECM equipment, power supplies, Radar and almost any application where high voltage components need to be interconnected.
The plug end is molded onto a desired length of silicone cable and can be ordered Single-Ended, Double-Ended or with shielding.
C series assemblies operate at voltages ranging from 10 KVDC to 50 KVDC and are interchangeable with Reynolds series 700 connectors and the LGH series. C series lead assemblies will operate up to 70,000 ft. and over a temperature range of -55°C to +95°C. Interface cleaning High voltage connectors must always be cleaned prior to mating. The proper cleaning method is to wipe or spray the interface area with isopropyl alcohol and immediately blow an inert gas such as dry nitrogen over the interface area until dry. No other cleaning method should be attempted. | 
 
| | WARNING: These connectors should NEVER be handled, mated or unmated when voltage is applied. |
Download PDF for all C Series General Specifications |
C 730 Lead assemblies and receptacles
C 730 Series 10 KVDC Shielded & Non-Shielded Lead Assemblies
7RC1500 Series C 730 Lead Assembly  Positive Stop (ferrule)
|  | |
| 17RC1500 Series C 730 Lead Assembly Positive Stop (ferrule)
|  | |
| RC1500 Series C 730 Lead Assembly  Non - Positive Stop (washers)
| |
| 3RC1500 Series C 730 Lead Assembly Non - Positive Stop (washers)
| |
| 2RC1500 Series C 730 Lead Assembly Non - Positive Stop (washers)
| |
| | C 730 Series Functional Characteristics
Operating voltage: 15 KVDC any altitude to 70,000 ft. • Operating Temperature: -55°C to +95°C
Mating connectors: All C 730 series receptacles • All series 730 receptacles • All LGH 1/2I series receptacles
Cable type: White 0.160 Dia. silicone rubber. #AWG 16
|
C 730 Series 10 KVDC Receptacles | |
| | RC1505 Series C 730 Receptacle
- Operating voltage: 10 KVDC to 70,000 ft.
- Operating temperature: -55°C to +95°C
- Mating connectors:
All C 730 lead assemblies
All series 730 lead assemblies
All LGH 1/2I lead assemblies
- Contact: Brass with gold | | | 2RC1505 Series C 730 Receptacle
- Operating voltage: 10 KVDC to 70,000 ft.
- Operating temperature: -55°C to +95°C
- Mating connectors:
All C 730 lead assemblies
All series 730 lead assemblies
All LGH 1/2I lead assemblies
- Solder flange: Brass with tin plate
- Contact: Brass with tin | | | 3RC1505 Series C 730 Receptacle
- Operating voltage: 10 KVDC to 70,000 ft.
- Operating temperature: -55°C to +95°C
- Mating connectors:
All C 730 lead assemblies
All series 730 lead assemblies
All LGHI 1/2I lead assemblies
- Contact: Brass with tin | |
Download this page as a PDF for best print quality.
C 737 Lead assemblies and receptacles
C 737 Series - 15 KVDC Shielded & Non-Shielded Lead Assemblies| P/N 7RC1510 Series C 737 Lead Assembly Positive Stop (ferrule)
| |
| | P/N 17RC1510 Series C 737 Lead Assembly Positive Stop (ferrule)
| |
| | P/N RC1510 Series C 737 Lead Assembly Non - Positive Stop (washers)
| |
| | P/N 2RC1510 Series C 737 Lead Assembly Non - Positive Stop (washers)
| |
| | P/N 178-6092 Series C 737 Lead Assembly Non - Positive Stop (washers)
| |
| | C 737 Series Functional Characteristics
Operating voltage: 15 KVDC any altitude to 70,000 ft. • Operating Temperature: -55°C to +95°C
Mating connectors: All C 737 series receptacles • All series 737 receptacles • All LGH 1/2I series receptacles
Cable type: White 0.160 Dia. silicone rubber. #AWG 16
|
| | | C 737 Series - 15 KVDC Receptacles | | | P/N RC1515 Series C 737 Receptacle
- Operating voltage: 15 KVDC to 70,000 ft.
- Operating temperature: -55°C to +95°C
- Mating connectors:
All C 737 lead assemblies
All series 737 lead assemblies
All LGH 1/2I lead assemblies
- Contact: Brass with tin plate | | | P/N 2RC1515 Series C 737 Receptacle
-Operating voltage: 15 KVDC to 70,000 ft.
- Operating temperature: -55°C to +95°C
- Mating connectors:
All C 730 lead assemblies
All series 737 lead assemblies
All LGH 1/2I lead assemblies
- Solder flange: Brass with tin plate
- Contact: Brass with tin plate | | | P/N 13RC1515 Series C 737 Receptacle
- Operating voltage: 15 KVDC to 70,000 ft.
- Operating temperature: -55°C to +95°C
- Mating connectors:
All C 730 lead assemblies
All series 737 lead assemblies
All LGH 1/2I lead assemblies
- Contact: Brass with tin plate | |
Download this page as a PDF for best print quality. |
