HI/Mate-D的高壓接點端子耐電壓可高達13.5 KVDC, 高壓接點端子可插入D型微型接頭8號空腔內, 該類接頭適用於空用裝備。

工作高度可達70,000呎, 工作溫度為-55°C至+125°C. HI/Mate-D型微型接頭與標準D型微型接頭信號線佈置是完全相容

HI/Mate-D高壓接點端子組合件如下圖, 此組合件已測試完畢並可安裝在D型微型接頭8號空腔內,

高壓接點端子組合件實際是能耐高壓的接頭而不是依賴D型微型接頭絕緣子的介電強度. 將高壓接點端子組合件插入空腔後不需要使用粘著劑或灌封膠劑,高壓接點端子被固定在空腔中.

Now ! A High Voltage Capability for Subminiature-D Connectors
HI/Mate-D high voltage lead assemblies are rated @ 13.5 KVDC and can be fitted into a Sub-D No. 8 gauge insert cavity. The assemblies are ideal for airborne applications up to 70,000 feet altitude over a temperature range of -55°C to +125°C. HI/Mate-D is fully compatible with signal lines in the same Sub-D connector.
					HI/Mate-D high voltage lead assemblies, shown enlarged above left, are tested and ready to install into the No. 8 gauge cavity of a Subminiature-D connector. These lead assemblies are, in actuality, high voltage connectors and do not rely on the dielectric strength of the Sub-D insulator. The insert serves only to hold and retain the HI/Mate-D lead assembly. No adhesives, potting or bonding are required.

Download this page as a PDF for best print quality.

公司電話：+886-2-26958906

上次更新日期： 2021年12月24日。